Pneumatic Oil Extractor 10 litre

This versatile oil and fluid extractor from Laser Tools (part number 6534), has been designed to extract engine oil from engines via the dipstick tube (or oil service pipe if no dipstick fitted), using vacuum generated by workshop compressed air pressure. The 10 litre capacity allows the unit to be used on most modern engines and provides the capacity for at least one sump full of oil while still maintaining a good level of portability.

Three extraction hoses are supplied, specifically sized for extracting oil via the dipstick tube — two semi-rigid nylon for use on dip stick tubes and one flexible silicone hose to fit and seal over the oil service pipe. A brake bleed nipple adaptor is also supplied which lets the unit (in conjunction with the flexible silicone hose) be used as a vacuum brake bleeder. The unit can also be used to extract gearbox oil, automatic transmission fluid and final drive oil. For best results ensure that all oils are warm before extracting.

All the supplied hoses include quick-fit connectors and the unit is easily evacuated by turning the extract/dispense control to dispense, which then pumps the waste fluid into a suitable container. The head unit is removable for easy cleaning and maintenance,

Useful in any busy vehicle workshop and available now from your local Laser Tools supplier.