6100 Hex Bit 1/2"D 24mm

Laser Tools have added four new additions to its range of specialist Ducati service tools. Part number 6100 fits the Ducati Monster from 2014 and is for the rear swinging arm pivots; it is a 24mm hex bit with a 1/2" drive. Two are required; one on each side of the bike, one to hold and one to undo.

Part number 6127 is a specialist pair of crows foot wrenches designed for the Ducati cylinder head nuts. The 15mm wrench is for models from 2002 to 2005 and the 14mm wrench fits post 2005 machines. In most cases they can be used with the engine still in the frame, the multi-hex design allowing easier access. Made in Sheffield by Laser Tools.

The rocker arm pin puller set (part number 6129), is used to extract the valve rocker pins on many Ducati models. A slide hammer is included plus three adaptors: M5, M6 and M7.

The Ducati Superbike Panigale models require an alternator cover puller due to the high magnetic field of the alternator magnets in the casing; the Laser cover puller (part number 6130) is made by Laser in Sheffield and supplied with three innovative guide pins to ensure straight removal and refitting of the cover. The force screw provides a smooth progressive force to remove the cover squarely and specially shaped plastic head prevents damage to the crankshaft and shaft nut.

Professional Ducati workshop tools and available now from your Laser Tools stockist, who will be happy to provide you with their best prices and special offers.