6552 AC/DC Digital Clamp Meter CAT III 1000A
Digital Clamp Meter suitable for use on all 12V system vehicles, as well as modern Hybrid and EV's.
- Digital clamp tester for AC/DC current measurement - CAT III 600V rated.
- True RMS current and voltage readings regardless of waveforms.
- 30mm clamp jaw opening.
- Specification: AC/DC current to 1000A, AC/DC voltage to 600V, AC/DC power to 240kw, resistance to 40MOhm, frequency to 10MHz, continuity and diode check, low battery indicator, data hold facility and auto power off.
- Supplied with test leads, carry case and battery. CE, UKCA & RoHS compliant.
TSP: £255.42 ex VAT £306.50 inc VAT
Pince multimètre numérique convenant à tous les véhicules à système 12 V, ainsi qu'aux véhicules hybrides et électriques modernes.
- Pince multimètre numérique pour mesure d'intensité CA/CC - conformité CAT III 600 V.
- Mesure de tension et d'intensité RMS indépendamment des formes d'onde.
- Ouverture de mâchoires de pince de 30 mm.
- Caractéristique : intensité CA/CC jusqu'à 1 000 A, tension CA/CC jusqu'à 600 V, puissance jusqu'à 240 kW, résistance jusqu'à 40 m, fréquence jusqu'à 10 MHz, test de diode et de continuité, indicateur de batterie faible, fonction de maintien des données et mise hors tension automatique.
- Fourni avec des fils de test, un boîtier de rangement et une pile. Conformité CE, UKCA et RoHS.
TSP: £255.42 ex VAT £306.50 inc VAT
Digitale klemmeter geschikt voor gebruik op alle voertuigen met 12V-systeem, naast modere hybride en elektrische voertuigen.
- Digitale Stroomtang voor het meten van gelijkstroom en wisselstroom
- Klemopening 30mm
- Specificatie: AC/DC stroom tot 1000a, AC/DC voltage tot 600v, AC/DC vermogen tot 240kw, werstand tot 40m, frequentie tot 10mhz, diode test, low battery indicator, data hold functie, auto power off.
- Geleverde met meetpennen en opbergtas
- Geleverd met testsnoeren , draagtas en batterij. CE & RoHS inbegrepen.
TSP: £255.42 ex VAT £306.50 inc VAT
Useful Downloads
Related Products
Press Release
High-spec digital clamp meters
Part of Laser’s ever-increasing range of tools that are ideal for hybrid and electric vehicles, these two new Digital Clamp Meters (part numbers 6551 and 6552), are both versatile and capable instruments and used in the installation, maintenance and checking of both AC and DC electrical systems and equipment.
The Laser 6551 is a special low-amps range model for diagnostic work on 4a/80a ranges with 1mA resolution and is capable of measuring AC and DC current of up to 80 amps, and AC and DC voltage of up to 600 volts. It is also capable of measuring resistance, diode function, continuity, frequency, duty cycle and capacitance test with inputs of up to 250 volts AC or DC, and the small probe clamp makes access easy
The Laser 6552 is capable of measuring AC and DC current of up to 1000 amps, AC and DC voltage of up to 600 volts and AC and DC power (wattage) up to 240 kW. It is also capable of measuring resistance, diode function, continuity, frequency, and duty cycle with inputs of up to 250 volts AC or DC. The 30mm diameter clamp is ideal for high-amp cables.
For both instruments, measurements are taken with the current clamp, the test leads, or a combination of both. Both are supplied with test leads, carry-case and battery. CE certificated and RoHS compliant.
These are professional tools for the professional technician and available now from your local Laser Tools supplier.
As an Amazon Associate I earn from qualifying purchases.
