7618 Wire Insertion Tool Set
An essential tool for directing wires through obstacles and barriers without damage to the insulation.
- A four piece tube set with screwdriver handle attachment to cover a wide range of lengths and diameters of sheathed wires.
- Also ideal to protect endoscopes from damage when inserting into tight areas.
- Radius ended tubes allows wiring to be pulled through without damage.
- Angular tube ends also stop wires from bending when in contact with solid obstacles or metal surfaces.
- Perfect for use when installing or repairing stereos, dashboard wiring, headlights and lighting etc.
TSP: £62.20 ex VAT £74.64 inc VAT
An essential tool for directing wires through obstacles and barriers without damage to the insulation.
- Ein vierteiliger Rohrsatz mit Schraubendreher-Griffaufsatz, passend für eine große Bandbreite an ummantelten Kabeln mit verschiedenen Längen und Durchmessern.
- Ebenfalls ideal zum Schutz von Endoskopen vor Beschädigung beim Einführen in enge Bereiche.
- Durch abgerundete Enden an Rohren kann Isolierung ohne Beschädigung durchgezogen werden.
- Abgeschrägte Rohrenden verhindern außerdem Verbiegen von Kabeln in Kontakt mit festen Hindernissen oder Metalloberflächen.
- Perfekt für den Einsatz bei Einbau oder Reparatur von Stereoanlagen, Armaturenbrett-Kabelführungen, Scheinwerfern, Beleuchtung usw.
TSP: £62.20 ex VAT £74.64 inc VAT
An essential tool for directing wires through obstacles and barriers without damage to the insulation.
- Jeu de quatre tubes avec accessoire de manche de tournevis pour couvrir un vaste éventail de longueurs et diamètres de fils gainés.
- Également idéal pour protéger les endoscopes contre tout endommagement lors de l'insertion dans des espaces restreints.
- Les bouts arrondis des tubes permettent de tirer la gaine sans l'endommager.
- Les extrémités de tubes angulaires empêchent également les fils de se plier lorsqu'ils entrent en contact avec des obstacles solides ou des surfaces métalliques.
- Parfait pour une utilisation lors de l'installation et la réparation de systèmes stéréo, de chemins de câbles dans le tableau de bord, de phares, de l'éclairage, etc.
TSP: £62.20 ex VAT £74.64 inc VAT
An essential tool for directing wires through obstacles and barriers without damage to the insulation.
- Een vierdelige buizenset met schroevendraaierhandgreep voor mantelkabels met uiteenlopende lengtes en diameters.
- Ook ideaal voor bescherming van endoscopen tegen schade wanneer deze wordt ingebracht in kleine ruimten.
- Ronde buisuiteinden maken het mogelijk mantelkabels er zonder beschadiging door te trekken.
- Hoek van buisuiteinden voorkomt ook dat draden buigen wanneer ze in contact komen met vaste obstakels of metalen oppervlakken.
- Perfect voor het installeren of repareren van radio's, het bedraden van dashboards, koplampen, verlichting, etc.
TSP: £62.20 ex VAT £74.64 inc VAT
Useful Downloads
Related Products
Press Release
Pass new wires or cables through bulkhead grommets with ease
Whether fitting electrical accessories or repairing a wiring harness, it can be a real problem trying to pass wires or cables through from the engine bay or boot into the passenger compartment. Or when carrying out wiring harness repairs it can be a real struggle passing a new wire through box sections or behind trim panels. Laser Tools offers two solutions: the wire insertion tool set (part number 7618) and the wire guide tool (part number 7775).
Harness bulkhead grommets are designed to seal against dirt and water ingress and getting another wire through there can be quite a challenge. The new wire insertion tool set is a four-piece tube set with a hollow screwdriver-type handle that is designed to easily pass through the grommet or seal therefore letting you slide a wire or cable through the tool to the other side.
Two widths and two lengths are supplied, covering a wide range of cable or harness section diameters and enabling access in tight areas. The tool is eased through the grommet without damaging the grommet or the existing wiring; the new wire or cable is pushed through the tool. Slide the tool back out, leaving the new wire in place. It’s as easy as that.
Passing a new wire or a repaired harness section through a box section can test the most patient technician — automotive wire has to be flexible but it is just not rigid enough to pass through longer sections. The wire guide tool solves this particular problem: it is one metre long and rigid enough to maintain its shape but remains very flexible. The wire is simply hooked around the loop which holds it securely as the wire guide is passed through the box section or behind the trim panel. The tool’s flexibility lets you guide it past any obstructions. Now carefully pull the guide and the wire through the section and the job is done.
Both the wire guide tool and the wire insertion tool kit are ideal when adding accessories like tow bars or even solar roof panels in your camper van. When you have to add or repair wiring, make it a professional job with Laser Tools. Available now from your Laser Tools stockist.
As an Amazon Associate I earn from qualifying purchases.
