7644 Multi V-Belt Pulley Alignment Tool
Multi V-Drive Belts are almost universally used on auxiliary drive systems on modern motor vehicles. To ensure maximum belt life and avoid premature wear or belt derailment it is important to ensure that all the pulleys are correctly aligned.
- Designed to check the alignment of Multi-V pulleys prior to fitting a new belt.
- Manually adjustable silver steel alignment rod. Length: 250mm.
- Main segment equipped with attachment magnets.
- Target segment design to be held by hand where required.
- Helps in the diagnosis of misaligned pulleys, failed idler pulleys, water pump, A/C pump and alternator bearings. Made in Sheffield. EU Registered Design.
TSP: £101.10 ex VAT £121.32 inc VAT
Multi V-Drive Belts are almost universally used on auxiliary drive systems on modern motor vehicles. To ensure maximum belt life and avoid premature wear or belt derailment it is important to ensure that all the pulleys are correctly aligned.
- Dient zur Überprüfung der Ausrichtung der Riemenscheiben von Keilrippenriemen vor dem Einbau eines neuen Riemens.
- Manuell verstellbarer silberner Ausrichtungsstab aus Stahl.
- Hauptsegment mit Befestigungsmagneten ausgestattet.
- Zielsegment, falls erforderlich, von Hand zu halten.
- Hilft bei der Diagnose von falsch ausgerichteten Riemenscheiben, defekten Umlenkrollen, Wasserpumpen, Klimaanlagenpumpen und Generatorlagern. Hergestellt in Sheffield. In der EU geschütztes Design.
TSP: £101.10 ex VAT £121.32 inc VAT
Les courroies d'entraînement Multi V sont presque universellement utilisées sur les systèmes d'entraînement auxiliaires des véhicules à moteur modernes. Pour garantir une longévité maximale de la courroie et éviter une usure prématurée ou un déraillement de la courroie, il est important de veiller à l'alignement correct de toutes les poulies.
- Conçu pour vérifier l'alignement de poulies Multi-V avant l'installation d'une courroie neuve.
- Tige d'alignement en acier argenté réglable manuellement.
- Segment principal équipé d'aimants de fixation.
- Segment cible conçu pour être tenu à la main si besoin est.
- Conçu pour faciliter le diagnostic d'un défaut d'alignement de poulies, de défaillance de poulies folles, de pompes à eau, de pompes de climatisation et de paliers d'alternateur. Fabriqué à Sheffield. Conception déposée UE.
TSP: £101.10 ex VAT £121.32 inc VAT
Multiriemen of v-snaren worden in bijna alle hulpaandrijvingen van moderne motorvoertuigen toegepast. Om te zorgen voor een maximale levensduur van de v-snaar en voortijdige slijtage of ontsporen te voorkomen, is het belangrijk dat alle poelies goed zijn uitgelijnd.
- Ontworpen om de uitlijning van Multi-V-poelies te controleren voordat een nieuwe riem wordt gemonteerd.
- Handmatig verstelbare zilverstalen uitlijnstang; lengte: 250mm.
- Hoofdsegment uitgerust met bevestigingsmagneten.
- Het ontwerp van het doelsegment moet waar nodig met de hand worden vastgehouden.
- Ontworpen om te helpen bij de diagnose van niet goed uitgelijnde poelies, defecte geleider, waterpomp, A/C-pomp en alternatorlagers. Gemaakt in Sheffield. EU-geregistreerd ontwerp.
TSP: £101.10 ex VAT £121.32 inc VAT
Useful Downloads
Related Products
Press Release
Quickly check multi V-belt pulley alignment with this new pulley alignment tool
Multi V-belts are commonly used on the auxiliary drive systems on modern motor vehicles. It is important to ensure that all the pulleys are correctly aligned, to avoid premature belt wear and ensure maximum belt life. This new multi v-belt pulley alignment tool (part number 7644) from Laser Tools provides an easy visual check of pulley alignment. Use it before fitting a new belt.
This is a visual checking tool that comprises an alignment pointer and a marked alignment checking segment. These are designed to fit snugly into the V-grooves of the pulleys on the crankshaft, auxiliary components (alternator or air-con compressor, for example) and tensioners. When the tool is set up in equal positions on the two pulleys being checked (typically, two v-grooves in from the outer edge), looking down the straight, silver-steel alignment pointer gives an instant visual confirmation of correct (or otherwise) alignment.
The tool quickly picks up on common misalignment problems: parallel misalignment, angular misalignment (component not mounted correctly perhaps), and pulley runout, which could be caused by a bent pulley shaft, a bent pulley, or worn and damaged bearings. Again, the pulley alignment tool gives a clear visual indication of the amount of misalignment or run-out.
The multi v-belt pulley alignment tool is an EU Registered Design, and manufactured by Laser Tools at their plant in Sheffield. A professional tool for the professional technician and available now from your local Laser Tools supplier.
As an Amazon Associate I earn from qualifying purchases.
