7848 T-Handle Pre Set Torque Bit Driver
Most modern vehicles incorporate large amounts of plastic in their construction for example dash board components, motorcycle fairing components, electronic sensors (ABS, CPS, etc.) and all these components use small threaded fixings that if overtightened will easily shear or crush the plastic components. The Laser 7848 kit provides 3 interchangeable pre-set torque driver shafts that allow the user to confidently tighten up low torque fixings. As well as plastic and alloy components, many electronic and electrical units are held in place by similar low torque fixings - for example airbags, ECU covers, mass air flow sensors, light covers and lens. The 7848 T-handle Torque Set is also ideal for the tightening of screws made from weaker materials - for example plastic and aluminium screws used on many high performance vehicles. Also ideal for other applications including bicycles or golf clubs.
- Magnetic 1/4" T-handle pre set torque bit driver, can be used with or without torque attachments.
- Three preset torque settings: 4Nm, 5Nm, 6Nm (+/- 6%), designed for low torque assembly fixings.
- Supplied with 4 bits: T10, T20, T25, Pz2, all stored safely in the handle.
- Supplied with a Certificate of Conformance.
- Supplied in an EVA foam tray for easy storage.
- All Laser torque wrenches (mechanical & digital) are supplied with a certificate of conformance & calibration produced at point of manufacture, as per ISO6789-1:2017
TSP: £72.24 ex VAT £86.69 inc VAT
Kompakter Bit-Drehmomentschlüssel mit 3 voreingestellten Anzugsmomenten und 4 Standardbits, mit T-Griff
- Magnetischer 1/4"-Bit-Drehmomentschlüssel mit voreingestelltem Anzugsmoment und T-Griff, der mit oder ohne Drehmomentvorsatz verwendet werden kann
- Drei voreingestellte Anzugsmomente: 4 Nm, 5 Nm, 6 Nm (+/- 6 %). Für Schraubverbindungen mit niedrigem Anzugsmoment ausgelegt
- 4 Bits im Lieferumfang enthalten: T10, T20, T25, Pz2 – im Griff integriert
- Lieferung mit Konformitätsbescheinigung
- Lieferung in EVA-Schaumstoff-Ablageschale zur praktischen Aufbewahrung
TSP: £72.24 ex VAT £86.69 inc VAT
Un porte-embouts dynamométrique compact à poignée en T avec 3 couples préréglés et 4 embouts standards.
- Porte-embouts dynamométrique magnétique préréglé à poignée en T de 1/4", peut s'utiliser avec ou sans accessoires de serrage.
- Trois couples préréglés : 4 N.m, 5 N.m, 6 N.m (+/- 6 %). Conçu pour des fixations à faible couple.
- Livré avec 4 embouts : T10, T20, T25, Pz2, tous rangés en toute sécurité dans la poignée.
- Livré avec un certificat de conformité.
- Livré dans un plateau en mousse EVA pour faciliter le rangement.
TSP: £72.24 ex VAT £86.69 inc VAT
Most modern vehicles incorporate large amounts of plastic in their construction for example dash board components, motorcycle fairing components, electronic sensors (ABS, CPS, etc.) and all these components use small threaded fixings that if overtightened will easily shear or crush the plastic components. The Laser 7848 kit provides 3 interchangeable pre-set torque driver shafts that allow the user to confidently tighten up low torque fixings. As well as plastic and alloy components, many electronic and electrical units are held in place by similar low torque fixings - for example airbags, ECU covers, mass air flow sensors, light covers and lens. The 7848 T-handle Torque Set is also ideal for the tightening of screws made from weaker materials - for example plastic and aluminium screws used on many high performance vehicles. Also ideal for other applications including bicycles or golf clubs.
- De magnetische bithouderset met momentvoorinstelling en 1/4"-T-handvat kan worden gebruikt met of zonder momentvoorinstelling.
- Drie momentvoorinstellingen: 4 Nm, 5 Nm, 6 Nm (+/- 6%), voor montagewerkzaamheden met een laag koppel.
- Geleverd met 4 bits: T10, T20, T25, Pz2, allemaal veilig opgeslagen in de handgreep.
- Geleverd met conformiteitsverklaring.
- Geleverd in een bewaartray van EVA-schuim voor gemakkelijke opslag.
TSP: £72.24 ex VAT £86.69 inc VAT
Useful Downloads
As an Amazon Associate I earn from qualifying purchases.
