8048 Ball End Socket Bit Set 1/2"D 20pc
A set of long, ball ended metric socket bits in Hex, Star* and Spline profiles, allowing up to 25º each way, providing greater access in confined areas.
- 1/2"D ball ended Hex socket bits: 4, 5, 6, 7, 8, 10 and 12mm; overall length: 100mm, bit length: 62mm.
- 1/2"D ball ended Star* socket bits: T20, T25, T27, T30, T40, T45, T50 and T55; overall length: 100mm, bit length: 62mm.
- 1/2"D ball ended Spline socket bits: M5, M6, M8, M10 and M12; overall length: 100mm, bit length: 62mm.
- Ball end for greater access, ideal in tight areas or where an obstruction prevents direct access to fasteners.
- Sockets manufactured from chrome vanadium, bits from impact grade S2 steel.
- Star is the equivalent to TORX® - 6 sided. TORX® and TORX PLUS® are registered trademarks of Acument Intellectual Properties, LLC.
TSP: £109.76 ex VAT £131.71 inc VAT
Satz langer metrischer Steckschlüsselbits in Sechskant-, Torx*- und XZN-Profil mit Kugelkopf, was das Arbeiten in einem Winkel bis zu 45° und somit einen besseren Zugang bei beengten Platzverhältnissen ermöglicht.
- Sechskantbits mit Kugelkopf, 1/2"-Antrieb: 4, 5, 6, 7, 8, 10, 12 mm; Gesamtlänge: 100 mm, Bitlänge: 62 mm.
- Torx*-Bits mit Kugelkopf, 1/2"-Antrieb: T20, T25, T27, T30, T40, T45, T50, T55; Gesamtlänge: 100 mm, Bitlänge: 62 mm.
- XZN-Bits mit Kugelkopf, 1/2"-Antrieb: M5, M6, M8, M10, M12; Gesamtlänge: 100 mm, Bitlänge: 62 mm.
- Kugelkopf zum leichteren Arbeiten in beengten Platzverhältnissen oder an Stellen, bei denen kein direkter Zugang zu den Schrauben möglich ist.
- Einsätze aus Chrom-Vanadium-Stahl in matter Ausführung, Bits aus S2-Stahl zur Verwendung mit Schlagschraubern.
TSP: £109.76 ex VAT £131.71 inc VAT
Jeu de douilles longues métriques à embout sphérique au profil hexagonal, étoile* et cannelé, permettant de travailler à un angle pouvant aller jusqu'à 45° et d'avoir un meilleur accès aux zones confinées.
- Douilles hexagonales à embout sphérique à carré de 1/2" : 4, 5, 6, 7, 8, 10, 12 mm ; longueur totale : 100 mm, longueur d'embout : 62 mm.
- Douilles étoile* à embout sphérique à carré de 1/2" : T20, T25, T27, T30, T40, T45, T50, T55 ; longueur totale : 100 mm, longueur d'embout : 62 mm.
- Douilles cannelées à embout sphérique à carré de 1/2" : M5, M6, M8, M10, M12 ; longueur totale : 100 mm, longueur d'embout : 62 mm.
- Embout sphérique pour un accès plus facile, idéal dans les endroits confinés ou là où une obstruction prévient un accès direct à la visserie.
- Douilles en chrome-vanadium à finition satinée, embouts en acier S2 de qualité impact.
TSP: £109.76 ex VAT £131.71 inc VAT
Een set lange, metrische dopbits met kogeluiteinde in zeskant-, Star*- en spie-profielen, 25º kantelbaar, wat voor betere toegankelijkheid van moeilijk bereikbare plekken zorgt.
- 1/2"D zeskante dopbits met kogeluiteinde: 4, 5, 6, 7, 8, 10, 12 mm; totale lengte: 100 mm; bitlengte: 62 mm.
- 1/2"D Star*-dopbits met kogeluiteinde: T20, T25, T27, T30, T40, T45, T50, T55; totale lengte: 100 mm; bitlengte: 62 mm.
- 1/2"D spie-dopbits met kogeluiteinde: M5, M6, M8, M10, M12; totale lengte: 100 mm; bitlengte: 62 mm.
- Kogeluiteinde voor betere toegankelijkheid, ideaal op krappe plekken of waar een obstructie de directe toegang tot bevestigingsmiddelen blokkeert.
- De doppen zijn gemaakt van chroom-vanadium, de bits van slagvast S2-staal.
TSP: £109.76 ex VAT £131.71 inc VAT
Useful Downloads
Related Products
Press Release
Access difficult-to-reach hex, Star® or spline fasteners with this Ball-End Socket Bit set
Quite often access to a fastener is obstructed by another component, this could be on an engine, gearbox or perhaps behind the dashboard. You can just about get a hex (or Star® or spline) bit onto the fastener but not quite, and there is a danger of breaking the bit if you force it. Laser Tools to the rescue with this Ball-End Socket Bit Set (part number 8048) which offers a comprehensive 20-piece set of long, ball-ended socket-bits in metric hex, Star and spline profiles. The “ball” design means that the bit will fit snugly at up to a 25° angle, providing the access that you need.
8048_plus2.jpg">The bits are 62mm in length and mounted in a 1/2" drive socket, which gives an overall length of 100mm to the socket-bits. Seven metric hex socket-bits are included: 4, 5, 6, 7, 8, 10 and 12mm; eight Star® bits: T20, T25, T27, T30, T40, T45, T50 and T55; and five metric spline bits: M5, M6, M8, M10 and M12. The sockets are manufactured from chrome vanadium alloy steel with the bits made from impact-grade S2 steel.
Professional tools for the professional technician and available now from your local Laser Tools stockist.
As an Amazon Associate I earn from qualifying purchases.
