7510 External Deburr/Chamfer Tool 3 - 19mm
This superior quality external deburr/chamfer tool makes light work of repairing damaged bolts and chamfering metal bar. Designed to be used with an electric drill, this professional tool has a 1/4” quick-chuck shaft for easy bit changes. The perfect tool to chamfer damaged wheel studs, a common issue when removing and replacing a wheel, a quick chamfer from the tool and this problem is overcome. Fitted with three super-hard HSS blades for a clean, smooth cut in a wide range of materials including stainless steel, hardened steel, mild steel and hard plastic. Use on lower speed settings for the best results (max. recommended speed is 400rpm). Covers all sizes of bolts, studs and threaded rod diameters from 3mm to 19mm. The instant solution for repairing hammer-damaged, squashed or flattened threads, this is a real problem solver in the workshop.
- Repair damaged wheel studs, bolts & deburr metal bar.
- Size range 3 - 19mm; max speed 0 - 400rpm.
- HSS blade 1/4" shank. Chamfer angle: 50 degrees (approx).
- Effective on stainless steel, hardened steel, mild steel, copper, brass, wood, fibreglass and hard plastic.
- Available as part of a set, please see Laser Part No. 7884 (set of 3 internal and external deburr/chamfer tools) and also in a larger size, Laser Part No. 7856 (13 - 35mm).
TSP: £28.78 ex VAT £34.54 inc VAT
Externes Entgrat-/Anfaswerkzeug mit HSS-Klinge zur Reparatur beschädigter Schrauben
- Effektiv auf Edelstahl, gehärtetem Stahl, Weichstahl, Kupfer, Messing, Holz, Glasfaser, hartem Kunststoff
- Größenbereich 3-19 mm, Geschwindigkeit 0-400 U/min
- HSS-Klinge, 1/4"-Schaft
- Zur Reparatur beschädigter Schrauben
- Verschleißteil
TSP: £28.78 ex VAT £34.54 inc VAT
Outil d'ébavurage/chanfreinage externe doté d'une lame en acier HSS pour la réparation de boulons endommagés
- Efficace sur l'acier inoxydable, l'acier trempé, l'acier doux, le cuivre, le laiton, le bois, la fibre de verre, le plastique dur
- Plage de tailles 3 à 19 mm, vitesse 0 à 400 tr/min
- Lame en acier HSS tige de 1/4"
- Pour la réparation de boulons endommagés
- Produit consommable
TSP: £28.78 ex VAT £34.54 inc VAT
Het afschuingereedschap kan worden gebruikt met een elektrische boor en is uitgerust met een 1/4 inch snelwisselas, de maximale aanbevolen snelheid is 400 omw/min. Het gereedschap is uitgerust met drie zeer harde, stalen messen met hoge snelheid die het gemakkelijk maken om beschadigde bouten en draden te herstellen. De messen snijden snel en eenvoudig en zijn doeltreffend op roestvrij staal, gehard staal, zacht staal, koper, messing, hout, glasvezel en zelfs hard plastic. Bouten, tapbouten en draadstangen, de afmetingen variëren tot 19 mm. Hamerschade of geplette en afgeplatte draden zullen verhinderen dat de borgmoer of wielmoer opnieuw kan worden vastgedraaid; een paar zappen van het ontbraam/afschuingereedschap lost dit probleem meteen op.
- Doeltreffend op roestvrij staal, gehard staal, zacht staal, koper, messing, hout, glasvezel, hard plastic.
- Afmetingen variëren van 3-19 mm, snelheid van 0 - 400 omw/min.
- HSS-mes 1/4 inch schacht.
- Voor het herstellen van beschadigde bouten.
- Groter gereedschap (afmetingen variëren van 13- 35 mm) beschikbaar, zie Laser-artikelnr. 7856.
TSP: £28.78 ex VAT £34.54 inc VAT
Useful Downloads
Related Products
Press Release
New external deburr & chamfer tool is specifically designed to repair the edge of damaged bolts, studs and pipes.
In a busy workshop there are numerous instances of threads getting damaged: whacking a track rod end with a hammer; cutting a bolt or threaded rod; whacking a driveshaft out of a hub — the threaded ends get torn and squashed. Wheel studs: they get damaged just by removing and refitting the wheels… Luckily there is a quick and easy solution from Laser Tools: the external deburr & chamfer tool (part number 7510).
The chamfer tool is designed to be used with an electric drill and is fitted with a 1/4" quick-chuck shaft, maximum recommended speed is 400rpm. The tool is fitted with three super-hard High Speed Steel blades that make light work of repairing damaged bolts and damaged threads. The blades cut quickly and cleanly and are effective on stainless steel, hardened steel, mild steel, copper, brass, wood, fibreglass, and even hard plastic. Bolts, studs and threaded rod, size range from 3mm right up to 19mm. Hammer-damage or squashed and flattened threads will stop the retaining nut or wheel nut screwing back on; a couple of zaps from the deburr/chamfer tool solves the problem instantly.
Cutting steel or copper pipe can leave an uneven edge that can stop an olive or tube nut being slid on. A gentle touch with the tool leaves a nicely chamfered edge, and the olive slides straight on.
The new Laser Tools external deburring & chamfer tool — available at your nearest Laser Tools stockist.
As an Amazon Associate I earn from qualifying purchases.
