8398 Fuel Line Disconnect Tool - for Ford, Vauxhall

Designed to allow the user to disconnect the fuel lines on Ford vehicles that use the metal push-fit type connectors. Used across the Ford range and designed to be used in accordance with OE instructions. Also found on Vauxhall fuel systems. These push-fit fuel connectors do not have buttons to open them but require the collets from the tool to be pushed up inside the connector to allow separation.

  • Applications include: Ford and Vauxhall EFI and Direct Injection petrol engines and TDCi diesel engines.
  • Ford applications include: C-Max (from 2003), EcoSport (from 2012), Fiesta (from 2013), Focus (from 2004), Kuga (from 2008), Mondeo (from 2007), Puma, S-Max (from 2006) and Transit Custom Hybrid (from 2019).
  • Engine applications include: 1.0L Duratec (GDi), 1.0L EcoBoost, 1.5L EcoBoost, 1.8L and 2.0L Duratec-HE and 2.0L TDCi diesel (DW10F engine code).
  • Used on pipe sizes 5/16" (8mm) and 3/8" (10mm).
  • Equivalent to OEM numbers 310-137 and CH-50637; Use in accordance with OEM instructions.
TSP: £17.02 ex VAT £20.42 inc VAT

Ermöglicht das Trennen von Kraftstoffleitungen mit Metall-Steckverbindungen an Ford-Fahrzeugen. Für die gesamte Ford-Fahrzeugpalette und zur Verwendung gemäß den OE-Anweisungen. Auch an Vauxhall-Kraftstoffsystemen zu finden. Diese eindrückbaren Kraftstoffanschlüsse haben keine Knöpfe zum Öffnen. Stattdessen müssen die Spannzangen des Werkzeugs nach oben in den Anschluss gedrückt werden, um die Verbindung zu trennen.

  • Einsatzmöglichkeiten u. a.: Ford und Vauxhall EFI- und Direkteinspritzungs-Benzinmotoren und TDCi-Dieselmotoren.
  • Einsatzmöglichkeiten bei Ford u. a.: C-Max (ab 2003), EcoSport (ab 2012), Fiesta (ab 2013), Focus (ab 2004), Kuga (ab 2008), Mondeo (ab 2007), Puma, Transit Custom Hybrid (ab 2019), S-Max (ab 2006).
  • Einsatzmöglichkeiten für Motoren u. a.: 1,0 l Duratec (GDi), 1,0 l EcoBoost, 1,5 l EcoBoost, 1,8 l und 2,0 l Duratec-HE, 2,0 l TDCi-Diesel (DW10F).
  • Für Rohrdurchmesser 5/16" (8 mm) und 3/8" (10 mm).
  • Entspricht OEM 310-137, CH-50637. Verwendung in Übereinstimmung mit den OEM-Anweisungen.
TSP: £17.02 ex VAT £20.42 inc VAT

Conçu pour permettre à l'utilisateur de déconnecter les conduites de carburant sur les véhicules Ford qui utilisent des raccords métalliques rapides. Utilisé sur toute la gamme Ford et conçu pour être utilisé conformément aux instructions données par le constructeur. Également présent sur les systèmes de carburant Vauxhall. Ces raccords rapides de conduites de carburant n'ont pas de boutons pour les ouvrir mais nécessitent que les collets de l'outil soient poussés dans le raccord pour permettre la séparation.

  • Les applications comprennent : Moteurs à essence et à injection directe Ford et Vauxhall EFI et moteurs diesel TDCi.
  • Les applications Ford comprennent : C-Max (à partir de 2003), EcoSport (à partir de 2012), Fiesta (à partir de 2013), Focus (à partir de 2004), Kuga (à partir de 2008), Mondeo (à partir de 2007), Puma, Transit Custom Hybrid (à partir de 2019), S-Max (à partir de 2006).
  • Les applications moteur comprennent : 1.0 L Duratec (GDi), 1.0L EcoBoost, 1.5 L EcoBoost, 1.8 L et 2.0 L Duratec-HE, 2.0 L TDCi diesel (DW10F).
  • À utiliser sur les conduites de 8 mm et 10 mm.
  • Équivalent de l'OEM 310-137, CH-50637. À utiliser conformément aux instructions du constructeur.
TSP: £17.02 ex VAT £20.42 inc VAT

Ontworpen om de brandstofleidingen af te koppelen op Ford-voertuigen waar metalen drukconnectoren in gebruik zijn. Te gebruiken conform de OE-instructies op diversen modellen Ford. Ook voor Vauxhall-brandstofsystemen. Op deze drukconnectoren van brandstofleidingen hebben zit geen knop, om ze open te maken moet een klemring in de connector geschoven worden.

  • Geschikt voor onder meer: Ford en Vauxhall EFI en Direct Injection benzinemotoren en TDCi dieselmotoren.
  • Ford-toepassingen omvatten: C-Max (vanaf 2003), EcoSport (vanaf 2012), Fiesta (vanaf 2013), Focus (vanaf 2004), Kuga (vanaf 2008), Mondeo (vanaf 2007), Puma, S-Max (vanaf 2006) en Transit Custom Hybrid (vanaf 2019).
  • Motor-toepassing zijn onder meer: 1.0L Duratec (GDi), 1.0L EcoBoost, 1.5L EcoBoost, 1.8L en 2.0L Duratec-HE en 2.0L TDCi diesel (DW10F motorcode).
  • Te gebruiken op leidingen van 5/16" (8mm) en 3/8" (10mm).
  • Equivalent met OEM 310-137 en CH-50637; gebruiken conform de OEM-instructies.
TSP: £17.02 ex VAT £20.42 inc VAT
 Buy Locally

Press Release
Easy to use fuel line disconnect tool — fits Ford & Vauxhall

Laser Tools has just released this fuel-line disconnect tool (part number 8398) that is designed to allow the user to easily disconnect the fuel lines on Ford vehicles that use the metal push-fit type connectors. Suitable across the Ford range and designed to be used in accordance with OE instructions.

These push fit fuel connectors do not have buttons to open them but require the collets from the tool to be push up inside the connector to allow separation. 

Used on pipe sizes 5/16" (8mm) & 3/8" (10mm), Ford applications include: C-Max (from 2003), EcoSport (from 2012), Fiesta (from 2013), Focus (from
2004), Kuga (from 2008), Mondeo (from 2007), Puma, Transit Custom Hybrid (from 2019), S-Max (from 2006). Engine applications include: 1.0L Duratec (GDi), 1.0L EcoBoost, 1.5L EcoBoost, 1.8L & 2.0L, Duratec-HE and 2.0L TDCi diesel (DW10F). Also found on Vauxhall fuel systems. Equivalent to OEM 310-137 and CH-50637.

Available now from your Laser Tools stockist.



Buy Online from
Buy 8398 Fuel Line Disconnect Tool - for Ford, Vauxhall from Amazon As an Amazon Associate I earn from qualifying purchases.