7279 Pulley Holding Tool Set - for VW Group
A comprehensive pulley holding tool used across the Volkswagen Group range of vehicles. Designed to hold camshaft, crankshaft, oil pump and water pump pulleys or sprockets while loosening and tightening the fixing bolts. A must have kit for anyone working on modern engines (not just VAG) where it is so important to hold the camshaft sprockets still while loosening or tightening the fixings during belt replacement and tensioning. A vital addition to any engine timing tool set. Use with Laser 8421 camshaft holding conversion disc when working on the latest 1.5 TSI VW Group engines.
- Complete set of adaptors: Ø4.8mm, Ø6mm; square 15 x 6mm, square 15 x 12mm; 13 x 17mm and 16 x 20mm cups; Spline M10 & M12.
- Equivalent to OEM T10172A (T10172) & T10554.
- Camshaft holding conversion disc for use on later VW Group 3 cylinder 1.0L & 1.5L engines also available, please see Laser Part No. 8421.
TSP: £240.96 ex VAT £289.15 inc VAT
Umfassender Satz von Riemenscheiben-Haltewerkzeugen, die in den Sortimenten von Audi, Skoda, Seat und Volkswagen benötigt werden
- Dienen zum Halten der Nockenwellen-, Kurbelwellen, Ölpumpen- und Wasserpumpenscheiben und -kettenräder während des Lösens und Festziehens der Befestigungsschrauben
- Entspricht OEM-Werkzeugen T10172A, T10554 und deckt außerdem Einsatzmöglichkeiten für T10172 ab
- Komplettsatz von Gegenhalterwerkzeugen für Kettenräder, inkl. 4,8 mm Durchm., 6 mm Durchm., 15 mm x 6 mm Länge, 15 mm x 12 mm Länge, 13 mm x 17 mm Länge, 16 mm x 20 mm Länge, M10, M12,
- Weitere Info erforderlich
TSP: £240.96 ex VAT £289.15 inc VAT
Ensemble complet d'outils de maintien de poulie utilisés sur les gammes Audi, Skoda, Seat et Volkswagen
- Conçu pour maintenir les poulies et pignons d'arbre à cames, de vilebrequin, de pompe à huile et à eau pendant le desserrage et le serrage des boulons de fixation
- Équivalent des outils OEM T10172A, T10554, et couvre également les applications pour T10172
- Jeu complet d'outils de maintien de pignon d'arbre à cames comprenant 4,8 mm de dia., 6 mm de dia., 15 mm x 6 mm de long., 15 mm x 12 mm de long., 13 mm x 17 mm de long., 16 mm x 20 mm de long., M10, M12,
- Plus de renseignements nécessaires
TSP: £240.96 ex VAT £289.15 inc VAT
Uitgebreide borggereedschapsset voor riemschijf, geschikt voor voertuigen van de VAG Group. Ontworpen om de nokkenas, krukas, olie-en waterpomppoelies, en tandwielen op hun plek te houden terwijl de bevestigingsbouten los- of vastgeschroefd worden.
- Complete set adapters: Ø 4,8 mm, Ø6 mm, vierkant 15 x 6 mm, vierkant 15 x 12 mm, kop 13 x 17 mm , kop 16 x 20 mm, spie M10, M12.
- Equivalent aan OEM T10172A (T10172), T10554.
TSP: £240.96 ex VAT £289.15 inc VAT
Narzędzie dedykowane do prostej obsługi silników benzynowych Audi 2.0 TFSi i FSi .
- Zaprojektowane do uchwycenia wałka rozrządu, wału korbowego, kół pasowych i zębatek pompy wodnej oraz pompy oleju i podczas odkręcania i dokręcania śrub mocujących.
- Zamiennik OEM T10172A (T10172) i T10554
- Pełen zestaw adapterów łącznie z Ø4.8 mm, Ø6 mm, kwadrat 15 mm x 6 mm, kwadrat 15 mm x 12 mm, kielich 13 mm x 17 mm, kielich 16 mm x 20 mm, klin M10, M12.
TSP: £240.96 ex VAT £289.15 inc VAT
Useful Downloads
Set Contents
| Component | Description | OEM Toolcodes |
|---|---|---|
| C872 | Camshaft Sprocket Holding Tool and Fixings |
T10172
T10172A
|
| C873 | Camshaft Sprocket Holding Tool Adaptor |
T10554
|
| C874 | 4.8mm x 15mm pins (2) |
T10172/10
|
| C875 | 6mm x 15mm pins (2) |
T10172/9
|
| C876 | 15mm square x 6mm pins (2) |
T10172/4
|
| C877 | 15mm square x 12mm pins (2) |
T10172/11
|
| C878 | 13mm ID. x 17mm OD Nut/Bolt Cap Pin (2) |
T10172/5
|
| C879 | 16.1mm ID x 20mm OD Nut/Bolt Cap Pin (2) |
T10172/6
|
| C880 | M10 OD Triple Square pins (2) |
T10172/7
|
| C881 | M12 OD Triple Square |
T10172/8
|
| C882 | 5.7mm Dia./9.7mm Dia/11.7mm Dia Stepped Pin |
T10172/1
|
| C883 | 11.6mm Dia x 23mm pins (2) |
T10172/2
|
Related Products
As an Amazon Associate I earn from qualifying purchases.
